Unlike a hitch, a loop knot creates a fixed loop in a rope that maintains its structure regardless of whether or not it is fastened to an object. It is created either when the end of a rope is fastened to its own standing part or when a loop in the bight of a rope is knotted. Loop Knot – A loop knot is the type of knot that forms a fixed loop.
#HOW TO DRAW ROPE UNRAVELING FULL#
It is a full circle formed by passing the working end of a rope over itself. Loop – A loop is one of the fundamental structures used to tie knots.
Lashing – A lashing is an arrangement of rope used to secure two or more items together in a rigid manner. Jamming – A jamming knot is any knot that becomes very difficult to untie after use. Knots that are resistant to jamming are called non-jamming knots. Hitch – A hitch is a knot that attaches a rope to some object, often a ring, rail, spar, or post. Good examples of a friction hitch are the Rolling Hitch and Prusik. Sometimes friction hitches are called slide-and-grip knots. They are often used in climbing applications. Likewise, to flake a rope means to coil it.įrap – Fraps are a set of loops coiled perpendicularly around the wraps of a lashing as a means of tightening.įriction Hitch – A friction hitch is a knot that attaches one rope to another in a way that allows the knot’s position to easily be adjusted. An example is when tying a Butterfly Knot.įlake – A flake refers to any number of turns in a coiled rope.
An elbow is created when an additional twist is made in a loop. Crossing or uncrossing the rope in a specific way, depending on the knot, can increase the knot’s strength as well as reduce its jamming potential.Įlbow – An elbow refers to any two nearby crossings of a rope. Although it is not necessarily the case, most decorative knots also have practical applications or were derived from other well-known knots. Decorative knotting is one of the oldest and most widely distributed folk art.ĭressing – Knot dressing is the process of arranging a knot in such a way as to improve its performance. Although capsizing is sometimes the result of incorrect tying or misuse, it can also be done purposefully in certain cases to strengthen the knotĭecorative Knot – A decorative knot is any aesthetically pleasing knot. It can mean either any central part of a rope (between the standing end and the working end) or an arc in a rope that is at least as wide as a semicircle. In either case, a bight is a length of rope that does not cross itself. Knots that can be tied without use of the working end are called knots on the bight.īinding Knot – Binding knots are knots that either constrict a single object or hold two objects snugly together. Whippings, seizings and lashings serve a similar purpose to binding knots, but contain too many wraps to be properly called a knot. In binding knots, the ends of rope are either joined together or tucked under the turns of the knot.Ĭapsizing – A knot that has capsized has deformed into a different structure. What follows is a glossary of knot-tying terms, much of which has been excerpted from Wikipedia’s List of Knot Terminology:īend – A bend is a knot used to join two lengths of rope.īight – A bight has two meanings in knotting. In this case, the running end of the rope is alongside the standing part of the rope, but is not crossed over (which would form and overhand or underhand loop). It can be “open” (as shown on the right). A bight doesn’t have to have a sharp bend. Bights can vary from a few inches to a few feet in length. This can be done with the running end (as shown on the left), or anywhere along the standing part (as shown in the middle). A bight is formed by doubling back a length of the rope against itself to form a U. And underhand loop is formed when the running end of the rope is placed under the standing part of the rope.
It can be formed anywhere along the standing part of the rope in the same fashion. An overhand loop is formed when a loop is made so that the running end of the rope is on top of the standing part. The rest of the rope is the standing part.
This end is sometimes referred to as the working end. The running end is the end of the rope that is used to tie the knot. These are two of the most common terms used in knot tying.
#HOW TO DRAW ROPE UNRAVELING HOW TO#
You should become familiar with these terms and use them as you learn how to tie the various knots. Peschke as presented in the 1998 printing of the 1993 edition of the Pioneering Merit Badge Pamphlet:īefore you begin learning new knots, you need to know some of the basic terms used in knot tying.
0 kommentar(er)
